Operation
8
8
Operation
General operations
Power
• Connect the plug of the power cord to the
power supply outlet, the power indicator will
flash showing that the unit is in standby mode.
To switch on the unit, press POWER button on
the panel or on the RC; the indicator will light
up. Press POWER button again to switch the
unit to the standby mode. To switch off the unit
completely, disconnect the power cord plug
from the power supply outlet.
• Do not leave your TV in standby mode for
a long period of time; if you are not going to
use the unit, disconnect it from power supply.
• In TV mode the unit will automatically go to
standby mode if no signal for 5 minutes. In PC
mode the unit will automatically go to standby
mode if no signal for 30 seconds.
Operations
• Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.
• Press
to mute sound, press this button
again or increase volume to resume sound.
• Press AUDIO button in TV mode
repeatedly to switch between DUAL I/ DUAL II/
DUAL I+II/Mono/Stereo sound modes (can be
unavailable for some channels). In DTV mode
press the button to switch audio languages.
• Press repeatedly SOURCE button on the
unit or on the RC, then press UP/DOWN cursor
buttons to cycle through the available signal
source options.
• Select the TV function mode. Press
CH-/CH+ buttons to select previous or next
channels; or press number buttons to enter a
channel number directly.
• Press RETURN ( ) button on the RC
to select from the present channel and the
previously displayed channel.
• Press LIST button to display the Channel
List. Use UP/DOWN to select, CH+/CH- to
scroll through the channel list.
• Press FAV button to display the Favourite
channel list in TV mode (you should setup your
favourite channels in Program Edit menu).
• Press INFO button to display the preset
TV channel play information.
• Press ZOOM button repeatedly to select
from a list of supported aspect ratios. The set
of available aspects can vary depending on the
current signal source.
• Press EPG to launch the Electronic
Program Guide (EPG) in DTV mode.
• Press TIMESHIFT to enable the Time Shift
function in DTV mode.
Teletext operations (option)
Select a TV channel in order to pick up
the picture signal of Teletext. Teletext button
functions are as follows:
TEXT (
): Press this button to enter into
TEXT mode. Press this button again to enter
mixed mode. Press the button again to return
to the channel you are watching.
HOLD (
): Press this button to stop the
move to the next page. Press this button again
to cancel operation.
INDEX (
): Press this button to go to the
index page.
SIZE (
): Press this button to enlarge the
top part of the page. Press this button again to
enlarge the bottom part of the page. Press this
button third time to normal size text page view.
REVEAL (
): Press this button to reveal the
cancelled information. Press this button again
to cancel the information.
SUBPAGE (
): Press this button to select
sub-page. Input the number of sub-page and
use numeric buttons in the format 0001 for
sub page 1. The teletext will search for the sub
page. Press SUBPAGE button again to exit the
subpage mode.
CANCEL (
): Press this button to cancel
the teletext; press again to show the teletext.
Red/Green/Yellow/Blue buttons: Press
these 4 color buttons to access directly to
corresponding color page displayed at the
lower parts of teletext screen.
Содержание TF-LED32S22T2
Страница 38: ......