Telefunken TF-LED32S16T2, Инструкция по эксплуатации

Страница: 4 / 35

Before you start
4
4
Before you start
the burning-light, direct sunlight, vibration,
high-temperature and humidity.
• Do not place any vase, potted plant, cup,
medicine and any container with water on this
product. If the liquid is spilt, it may cause the
fire, electric shock or breakdown.
• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.
• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.
• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.
• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left and right of the TV.
• Please place all the signal cords behind of
rear panel.
• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LED TV up or down display direction.
• Do not transport it with the power cord
connected. If you move this product with the
power cord or the connection cable connected,
the damaged power cord, connection cable
or connection terminal may cause the fire, the
electric shock or breakdown.
• 2 persons or more shall transport the
device, which is heavier than 18 kg. If you drop
or tip over the device, it may damage it.
• The temperature of the product’s body
becomes a little higher after a long period use.
This phenomenon indicates that heat exchange
in normal working mode, thus please do not
let children or anyone who is sensitive of
temperature to touch.
• Please allow at least a 5 hour wait at room
temperature before switching on the power
after transpoting or storing the TV at below
zero temperatures.
All images provided herein are schematic
drawings and may differ from of real objects.
Installation
Wall mounting
For wall mounting the back panel of this unit
is equipped with a VESA slot. A 200*150 mm
VESA wall-mount bracket should be used for
wall mounting. The wall-mounting bracket is not
included and should be acquired separately.
Manufacturer is not responsible for improper
mounting resulting in a damage to the unit.
Stand installation
Cover a flat stable surface with a soft cloth.
Place the TV unit facedown on the cloth. Insert
double support legs and fix them with 4 screws
as shown below.
WARNING
In order to avoid damage, make sure
to secure the unit on the wall
according to the wall mounting
instruction
.