Telefunken TF-LED24S01T2, Инструкция по эксплуатации

Страница: 5 / 38

Before you start
5
4
Before you start
Connection
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector
Outdoor Antenna Connection
Use 75 Ω coaxial cable plug or 300-75 Ω
impedance converter to plug in antenna input
terminal on the rear of the cabinet.
• Plug the power cable in the electric outlet,
making sure the current voltage is supported.
• If the video source has a HDMI output
jack, you can connect the signal to the
monitor with the HDMI cable (not included).
• Coaxial SPDIF output is intended for
transmitting multi-channel sound to an external
decoder (e.g. in 5.1-CH format). Coaxial cable
should be used for connection (not included).
• PCMCIA slot is used for CI modules that
are obtained from your digital TV provider.
• SCART socket is used to connect external
devices with a SCART cable (not
included).
• Connect your headphones or earphones
(not included) to the headphone socket of
this unit. When earphones are connected, the
sound output through the built-in speakers of
this unit is mute.
• Connect the video source to the
miniAV input using a special cable (not
included).
• Component input miniYPbPr is
intended to receive component video signal
from the external device. Connection is made
with the help of a special component cable
(not included).
Other connections
.
• When using the LED as a computer
screen, connect the PC to the VGA jack from
the monitor by the relevant cable (not included).
• This unit has PC audio in jack. Connect
this jack to PC main unit with related audio
cable in PC mode and adjust the volume to
what you want.