Telefunken TF-LED19S2, Инструкция по эксплуатации

Страница: 8 / 29

Operation
8
Operation
General operations
• Connect the round terminal of the adapter
to the power adapter input of the TV (the
position of the input is given in paragraph
Control Elements above). Connect the plug
of the adapter to the power supply outlet, the
power indicator will light up in red showing
that the unit is in standby mode. To switch on
the unit, press POWER button on the panel
or on the RC. Press POWER button again to
switch the unit to the standby model, the power
indicator will light up in red. To switch off the
unit completely, disconnect the power adaptor
cord plug from the power supply outlet. If after
connecting the adapter plug to power supply the
power indicator does not light up in red, please
wait for some time and the unit will turn on
automatically (this effect takes place if the unit
had been disconnected from the power supply
without being previously switched to standby
mode).
• Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.
• Press to mute sound, press this button
again or increase volume to resume sound.
• Press SLEEP button repeatedly to set the
sleep time (from 10 to 240 min or off). When
sleep time is set, press this button to display
the time remaining until the auto turn off.
• Press AUDIO ( ) button in TV mode
repeatedly to switch between Nicam Stereo,
Mono, Dual I and Dual II sound modes (can be
unavailable for some channels).
• Press repeatedly TV/AV button on the unit
or press SOURCE button on the RC, then press
UP/DOWN cursor buttons to cycle through the
available source list as follows: TV - AV - YPbPr
- VGA - HDMI - USB. Or you can press HDMI
button on the RC to access the HDMI signal
source directly; press USB button on the RC to
access USB mode directly; press PC button on
the RC to access the VGA mode directly.
• Press repeatedly S.MODE button to select
sound mode: Standard => Music => Movie =>
Sports => User.
• Press repeatedly P.MODE button to select
sound mode: User => Standard => Dynamic
=> Mild.
• Select the TV function mode. Press
CH-/CH+ buttons to select previous or next
channels; or press number buttons to enter a
channel number from 0 to 199 directly.
• Press RECALL ( ) button on the RC
to select from the present channel and the
previously displayed channel.
• Press STILL button to freeze the picture
on or off.
• Press button to display the Favourite
channel list in TV mode (you should setup your
favourite channels in Program Edit menu).
• Press INFO button to display the preset
TV channel play information.
• Press ZOOM ( ) button repeatedly to
select an aspect ratio: 16:9/4:3/Panorama/
Zoom1/Zoom2. The set of available aspects can
vary depending on the current signal source.
Teletext operations (option)
Select a TV channel in order to pick up
the picture signal of Teletext. Teletext button
functions are as follows:
TEXT ( ): Press this button to enter into
TEXT mode. Press this button again to enter
mixed mode. Press the button again to return
to the channel you are watching.
HOLD ( ): Press this button to stop the
move to the next page. Press this button again
to cancel operation.
INDEX ( ): Press this button to go to the
index page.
SIZE ( ): Press this button to enlarge the
top part of the page. Press this button again to
enlarge the bottom part of the page. Press this
button third time to normal size text page view.
REVEAL ( ): Press this button to reveal the
cancelled information. Press this button again
to cancel the information.
SUBPAGE ( ): Press this button to select
sub-page. Input the number of sub-page and
use numeric buttons in the format 0001 for
sub page 1. The teletext will search for the sub
page. Press SUBPAGE button again to exit the
subpage mode.
CANCEL ( ): Press this button to exit from
the teletext mode.
E/W: Press this button to switch between