Instruction manual
7
USB/SD operation
Playback
• Insert a USB device into the USB
port. Insert an SD memory card into
the memory card slot according to the
marking on the unit.
• Set the function switch to USB/
SD position. Playback of the first track
contained in the USB/memory card
will start automatically. If both USB
and SD are connected simultaneously,
USB will be played by default. If you
connect an SD card while USB is being
played, the unit will switch to SD card
playback. Press USB/SD button on
the RC or press and hold /MEMO/
USB/SD button on the unit to switch
between USB and SD playback. When
USB is being played, USB indicator
flashes; when SD is being played, SD
indicator flashes.
• The display starts by showing the
number of the first track for 10 seconds,
then the display shows clock. Press
SNOOZE button to switch between
track number and clock display.
• Press /MEMO/USB/SD button
on the unit ( /PLAY/PAUSE button on
the RC) to pause playback; the track
number will be blinking. Press it again
to resume playback.
• Press repeatedly
/TUN- and
/TUN+ buttons on the unit (
/
TUNING and
/TUNING buttons on
the RC) to go to previous or next track.
• Press REPEAT button on the
RC once (“ALL” will be displayed), all
tracks will be played repeatedly. Press
the button once again (“ONE” will be
displayed), the current track will be
played repeatedly.
General USB/SD notes
• This unit is equipped with a USB
and SD sockets that can accept and
play MP3 files stored on standard USB
flash (2.0 version) up to 32 GB or and
SD memory card up to 32 GB.
• FAT and FAT32 file system is
supported by this unit.
Always switch off the player
before removing a USB flash drive or
a memory card to prevent damage to
the storage.
Note:
A small percentage of USB
flash drives and memory cards might
not be readable, due to those device
manufacturers’ non-compliance with
the full official standards. Use only
licensed USB/SD storages of famous
brands.
Line in jack
You can connect the audio output of
an external device to this unit, to listen
to the sound of that device through the
speakers of this unit.
• To connect an external audio
device, please use a standard audio
cable with 3.5-mm-to-3.5 mm plugs to
connect the headphone out or audio
line-out of the external device to the
