English
- 69 -
To pair the glasses and TV:
1.
Ensure TV is in 3D mode and glasses are within
0.5M of the TV.
2.
In power on or power off state, press the power
button for 3 seconds. The LED light will flash
red and green whilst pairing is in progess.
Pairing success is indicated by the 3D glasses
shutters operating normally and the 3D content
can be viewed.
3.
If the glasses cannot successfully pair with the
TV, the LED indicator will light red. If this is the
case, repeat steps 1 and 2 above.
Replacement of battery
•
Push the spring clasp to the left, at the same time
move the battery lid up as indicated in picture 1.
•
Pull the battery lid up. Install or replace the battery
as indicated in picture 2 observing correct polarity.
•
Close the battery lid as shown in picture 3.
picture 1
picture 2
picture 3
Operation Instruction and Function of Power
LED Light
Power on
•
Ensure TV is in 3D mode
•
Press the power button on the glasses
• The LED light will flash red. Glasses are now in
ON state
Power off
•
Press the power button on the glasses
• The LED light will flash red. Glasses are now in
OFF state
Automatic Power off
If the glasses do not receive a Bluetooth signal from
the TV within 3 seconds, the glasses will automatically
shutdown, indicated by the LED light flashing red.
Low battery power
If the battery power is low, the LED light will flash
every 2 seconds and/or the glasses shutter will
work abnormally. In this case replace the battery as
indicated in the above section.
To ensure better 3D vision experience, please watch within
the suggested viewing range (Pairing range ≤0.5M).
Horizontal
view
View Range1-10m
Standard Specification
3D method Liquid Crystal Shutter
Dimensions Width:
147 mm
Height:
39 mm
Depth:
154 mm
Operating temperature:
0°C - 40°C
Weight (including battery):
28g ± 2g
Material Frame:
Resin
Lens:
Liquid crystal glass
Battery:
CR1620;
Battery life:
40hr +/- 5hr
The battery operating time may become shorter
depending on the
usage condition or environment.
Pairing range:
< 0.5 m
Viewing range:
1-10 m
The specification may change without notice.
We herby declares that this product with an integrated
Wireless Function is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC..
EU Conformity Statement
This product is carrying the CE-Mark in
accordance with the related European
Directives.
This product is labeled with the CE Mark in
accordance with the related European Directives,
notably Low Voltage Directive 2006/95/EC,
Electromagnetic Compatibility Directive 2004/108/
EC and RoHS Directive 2011/65/EU.
The following information is only for EU-member
states:
Disposal...
The following information is only for EU-member
states:
Disposal of products
The crossed out wheeIed dust bin symbol
indicates that products must be collected
and disposed of separately from household
waste. Integrated batteries and accumulators can be
disposed of with the product. They will be separated
at the recycling centres.
The black bar indicates that the product was placed
on the market after August 13, 2005.
