Tele
Eye RX504 User Guide Page 12
5.
Setup desired action in this panel, for details please refer to WX-30 User
manual.
6.
Click
[Update Check List]
after change or format Hard Disk.
4. Network setup
1.
Click Transmitter > Settings
2.
Click Connection
3.
Throughput setting is used to limit RX504’s output data rate at individual video
stream.
4.
Select 100Mbps for LAN stream
5.
Narrowband throughput, following are suggested initial throughput for reference
only.
l
HSDPA / UMTS: 512kbps
l
EDGE:
64kbps
l
GPRS:
19.2kbps
Noted that mobile data rate varies with different environment. If video delayed,
please select lower throughput.
6.
Click Network Settings
