TeleEye DM 564, Руководство пользователя, Страница: 9 / 14

8
VI.
Dome Setting
1. Before installing the dome device, set the dip-switches to match the communication protocol, transmission
baud rate, and dome address ID of the control device.
Figure 6.1 Location of the ID number dip-switch and Protocol/Baud rate dip-switch.
2. Address setting of Dome device (first 8 digits of SW1):
Coding Description:
Dome Address is represented in binary format, where ON represents “1”, OFF represents “0”.
The above table only present the settings of 0-20 address code. The setting of the rest of the
address code(0~255) can be deduced.
Address coding range: 0
～
255