manualshive.com logo in svg

Teledyne Sierra M6-2, Руководство пользователя, Страница: 54 / 538

Поделиться
Скачать
Teledyne Sierra M6-2 Скачать руководство пользователя страница 54

Teledyne LeCroy

SAS/SATA Software Menus and Toolbars

52

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

Exclude RRDY (SAS only)

Check this to exclude RRDY primitives from the data capture.

Exclude NOTIFY (SAS only)

Check this to exclude NOTIFY primitives from the data capture.

Exclude Idle

Check this to exclude Idles from the data capture.

Define different patterns for pre-trigger and post-trigger data captures

Replaces the Capture tab with a Pre

‐

Trigger Capture tab and a Post

‐

Trigger Capture tab.

2.4 

SAS/SATA Software Menus and Toolbars

The SAS/SATA software has the following menus and toolbars.

Note:

The sections 

“SAS Main Toolbar”

 and 

“SATA Main Toolbar” on page 53

 are shown separately to 

indicate the different context sensitive toolbar options depending on whether SAS or SATA trace 
or project is open.

2.4.1

SAS Main Toolbar

The following figure displays the SAS main toolbar.

Figure 2.29: SAS: Software Menus and Toolbar

Open Project File

Launch Trainer

Launch Jammer

               Abort Capturing Without Saving Sample File

                  

Start Target Emulator 

Find DUT

Stop Recording

Upload Manager

Start Recording

Stop Target Emulator 

Save

Manual Trigger

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов