manualshive.com logo in svg

Teledyne Sierra M6-2, Руководство пользователя, Страница: 117 / 538

Поделиться
Скачать
Teledyne Sierra M6-2 Скачать руководство пользователя страница 117

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

115

Projects

 Teledyne LeCroy

Note:

Ports 1 and 2 are a pair. Put related hardware on one pair. For example, put two analyzers on 

ports 1 and 2. 

Jammer can pair with one or two analyzers on a port. 
Jammer does not work with Trainer.

Trainer can pair with one analyzer on a port. 
Trainer does not work with emulators. 

Trainer does not work with Jammer. 

MUX Setting (SAS only)

Enable Muxing on port combinations.

Figure 2.102: MUX Setting Dialog Box

If you enable this option on two ports, the data of both ports transfers on one physical 
link, whose speed is twice the speed of each link, and the data of two links multiplexes on 
one physical link. For example, two 3 G ports together make one 6 G port. Note the 
following (see 

Figure 2.103 on page 115

):

The muxing check boxes are usable only if two or more emulator channels are 
selected.

The initiator emulator check box is greyed out if only one emulator channel is 
selected.

Figure 2.103: Initiator Emulator Check Box and Channel Speeds

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов