Teledyne Princeton Instruments PICam 5.x, Руководство программиста

Страница: 101 / 357

Chapter 5 Configuration APIs 101
5.1.1.37 PicamTriggerResponse
Data Type
PicamTriggerResponse
is defined as
enum
.
Description
PicamTriggerResponse
is the set of the hardware’s responses to an external trigger.
Enumerator Definitions
Refer to Table 5-37 for enumerator definitions.
5.1.1.38 PicamTriggerSource
Data Type
PicamTriggerSource
is defined as
enum
.
Description
PicamTriggerSource
is the set of trigger sources.
Enumerator Definitions
Refer to Table 5-38 for enumerator definitions.
Table 5-37:
PicamTriggerResponse
Enumerator Definitions
Enumerator Description
PicamTriggerResponse_ExposeDuring
TriggerPulse
Each trigger controls when exposure begins
and ends.
PicamTriggerResponse_GatePerTrigger
The hardware generates a gate pulse after the
trigger.
PicamTriggerResponse_NoResponse
The hardware does not respond to triggering.
PicamTriggerResponse_ReadoutPer
Trigger
The hardware reads out the sensor after each
trigger.
NOTE:
For hardware that can
non-destructively readout, all
non-destructive readouts associated
with the normal readout will occur
on the same trigger as the normal
readout.
PicamTriggerResponse_ShiftPer
Trigger
Each trigger moves to the next frame on the
sensor.
PicamTriggerResponse_StartOnSingle
Trigger
The hardware begins acquisition after a single
trigger.
Table 5-38:
PicamTriggerSource
Enumerator Definitions
Enumerator Description
PicamTriggerSource_External Triggers originate from an external source.
PicamTriggerSource_Internal
Triggers originate from the hardware itself.
PicamTriggerSource_None No triggers.