Teledyne Princeton Instruments NIRvana HS, Системное руководство, Страница: 22 / 107

22 NIRvana HS System Manual Issue 1.0
2.4 Optical Mounts
Each NIRvana HS is equipped with:
• A C-mount Mount; or
• A Spectroscopy Mount.
Figure 2-4 shows these two adapters.
Figure 2-4: Available Optical Adapters
If desired, the alternate mount can be ordered from Teledyne Princeton Instruments.
Contact Customer Service for assistance. Refer to
Contact Information on page 100 for
complete information.
The Following adapters are available to convert from/to a different mount:
• 7607-8001 Spectrometer Nose Kit
• 7607-8002 C-Mount Nose Kit
Refer to Appendix C for installation instructions.
2.5 Coolant Hoses
There are (2) quick-disconnect fittings provided with the camera system. The fittings are
compatible with 1/4" ID coolant hose such as Tygon 5624k51
2.6 Certificate of Performance
Each NIRvana HS camera is shipped with a Certificate of Performance which states that
the camera system has been assembled and tested according to approved Teledyne
Princeton Instruments procedures. It documents the camera’s performance data as
measured during the testing of the NIRvana HS and lists the following camera- and
customer-specific information:
• Sales Order Number;
• Purchase Order Number;
• Camera Serial Numbers
This information is useful when contacting Teledyne Princeton Instruments Customer
Support.
4
4
11
-0
16
9
_
00
07
C-M
OUNT
S
PECTROSCOPY
M
OUNT