Teledyne PIXIS-XF, Системное руководство, Страница: 43 / 116

Chapter 5 Operation 43
4. Drag the camera icon into the Experiment Devices area. See Figure 5-4 .
Figure 5-4: Typical LightField Experiment Devices Area
The Experiment Settings stack on the left displays several expanders. Since this is a
new experiment, the default settings for the camera will be programmed.
5. The Status bar at the bottom of the window displays an icon for temperature status.
Temperature status reports the current temperature and whether the set
temperature has been reached. Clicking on the icon opens the Sensor expander
where the set temperature can be changed.
6. Click on the View tab above Experiment Devices, to change to the Display area.
4
4
11
-01
12_0
019