Teledyne Mixchek Скачать руководство пользователя страница 3

Страница: 3 / 38

MIXCHEK

Teledyne

Analytical

Instruments

iii

Specific Model Information

The instrument for which this manual was supplied may

incorporate one or more options not supplied in the standard instrument.
Commonly available options are listed below.

CE CONFORMITY:

This Teledyne Analytical instruments

MIXCHEK

Analyzer meets or exceeds all requirements of

the Commonwealth of Europe (CE) for Radio Frequency
Interference and Electromagnetic Interference (RFI/EMI)
protection.

MIXCHEK

MCWHE:

Wall-mountable instrument with

view window for helium analysis.

MIXCHEK

MCWHEO2:

Wall-mountable instrument with

view window for helium and oxygen analysis.

MIXCHEK

MCPHE:

Battery operated portable instrument

for helium analysis.

MIXCHEK

MCPHEO2:

Battery operated portable

instrument for helium and oxygen analysis.

Optional AC to DC Adapter:

Power instrument directly

from 115VAC US plug source.

Optional International Power Adapter:

Powers instrument

directly from an AC power source 100-240 VAC 50/60 Hz
CE approved. Includes US and 3 international AC plugs.

Содержание Mixchek







































Результаты поиска

Содержание Mixchek

Отзывы:

Teledyne Mixchek, Руководство по эксплуатации, Страница: 3 / 38

Результаты поиска

Содержание Mixchek

Отзывы: