manualshive.com logo in svg

Teledyne Mini Compact Outdoor, Руководство по эксплуатации

Поделиться
Скачать
Teledyne Mini Compact Outdoor Скачать руководство пользователя страница 19

Operations Manual, HPA3, Mini Compact Outdoor SSPA 

208143 REV C 

19 

2.3.2 Air Flow and Removable Fan Tray 

 
The Mini Compact Outdoor Amplifier’s cooling system represents a landmark in microwave 
telecommunication amplifiers. It is a unique system of heatsinks that have been computer  
optimized to provide extremely efficient cooling of all of the system’s functional blocks. This 
high efficiency cooling system is primarily responsible for the small overall package size and 
reduced weight of the unit (approximately 24.5 lbs or 11.1 kg). 
 
The cooling system is based on a forced convection technique in which the system fans  
provide the air intake while the exhaust is brought out around the outer perimeter of the fans. 
The fans are 132 CFM rated and operate into approximately 0.3 in. H

2

O back pressure, and 

produce 68.0 dB-A measured at a distance of 1 meter from the fan intake. 
 
The air intake and exhaust are both located on the bottom side of the amplifier. The intake is 
brought through two fans while the exhaust is along the two rows of heatsink fins as seen in 

Figure 2-2

.  

A minimum clearance of 6 inches (152 mm) should be maintained between the bottom of the 
amplifier and any mounting surface. This will ensure that there is no forced re-circulation of 
airflow from exhaust to intake.  

 
Warning! The Mini Compact Outdoor SSPA should NEVER be mounted 
with the fans facing up. Doing so will void your warranty. 

 
The fans should be examined periodically and any obstruction or debris should be cleared. 
Inadequate air flow can cause the amplifier to overheat and cause a temperature fault. See 

Section 7: Troubleshooting and Maintenance

 

for cleaning instructions. 

 

RF OUT

J2

Figure 2-2: Mini Compact Outdoor SSPA Air Flow 

Содержание Mini Compact Outdoor























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды