Teledyne Linea 16K CL, Руководство пользователя

Страница: 62 / 94

60
•
Appendix A: GenICam Commands Linea CL Series Camera
Camera Control Category
The Linea CL camera controls, as shown by CamExpert, groups sensor specific features. This group
includes controls for line rate, exposure time, and so forth. Parameters in gray are read only, either
always or due to another feature being disabled. Parameters in black are user set in CamExpert or
programmable via an imaging application.
Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or
third party software usage—not typically needed by end user applications.
Camera Control Feature Descriptions
The following table describes these features along with their view attribute. Additionally the
Standard & View column will indicate which feature is a member of the custom DALSA Features
Naming Convention (indicated by DFNC), versus the GenICam Standard Features Naming
Convention (SFNC not shown).
Display Name Feature & Values Description Standard
& View
Sensor Color Type sensorColorType Defines the camera sensor color type. < RO > Beginner
DFNC
Monochrome Monochrome Sensor color type is monochrome.
Internal Line Rate AcquisitionLineRate Specifies the camera internal line rate, in Hz. Beginner
Measured Line Rate measureLineRate Displays the line rate provided to the camera by
either internal or external source < RO >
DFNC
Beginner
Measured CC1 measureCC1Rate Displays the CC1 signal rate provided to the
camera. < RO >
DFNC
Beginner
Refresh measured line rate refreshMeasureLineRate Updates the measureLineRate value.
DFNC
Beginner
Exposure Time Source ExposureMode Sets the operation mode for the camera’s
exposure.
Beginner
Timed Timed The exposure duration time is set using the
Exposure Time feature and the exposure starts
with a LineStart event.
Trigger Width TriggerWidth Uses the width of the trigger signal pulse to control
the exposure duration. Use the Trigger Activation
feature to set the polarity of the trigger. The
Trigger Width setting is applicable when the
LineStart trigger is enabled and a signal is selected
as trigger source.
Exposure Time ExposureTime Sets the exposure time (in microseconds) when the
Exposure Mode feature is set to Timed.
Beginner
Measured Exposure Time measureExposureTime Displays the exposure time used by the camera
sensor.
DFNC
Beginner
Refresh Measured Exposure
Time
refreshMeasuredExposureTime Updates the measuredExposureTime value. DFNC
Beginner
Offset BlackLevel Analog black level (offset) in DN. Controls the black
level as an absolute physical value. This represents
a DC offset applied to the video signal.
Beginner
Gain Gain Sets the gain as an amplification factor applied to
the image.
Beginner