Teledyne LeCroy T3PS Series, Руководство пользователя

Страница: 88 / 159

UART transmission control protocol TCP settings.
This is used primarily for multi-unit remote
control, see page 126.
F-75
0 = SCPI, 1 = Emulation mode
UART Address: this is used to set the address of a
unit when using multi-unit remote control, see
page 126 for details.
F-76
0-30
Sets the master/slave/display-information
parameters of a unit when using Multi-Drop
remote control, see page 126 for details.
F-77
0 = Disable, 1 = Master, 2 = Slave,
3 = Display Information
Displays the Multi-Drop status on the master unit
for each slave unit belonging to the Multi-Drop
bus, see page 126 for details.
F-78 Displayed parameter: AA-S
AA: 00-30 (Address),
S: 0-1 (Off-line/On-line status).
Returns the T3PS to the factory default settings.
See page 140 for a list of the default settings.
F-88
0 = None, 1 = Factory Default.
Displays the T3PS version number, build date,
keyboard CPLD, analog board CPLD, analog
board FPGA, kernel build date, test command
version and test command build date.
F-89
0-XX = Version (1/2)
1-XX = Version (2/2)
2-XX = Build year (1/2)
3-XX = Build year (2/2)
4-XX = Build month
www. .com
information@itm.com 1.800.561.8187