52
Contents
Falcon4 86M Cameras
H1_Pin11Pos_Pin12Ne
g
H1_Pin11Pos_Pin12Neg
General Purpose Input 2:
Hirose Pin 11 Positive, Pin 12 Negative.
H1_Pin3_Pin4
H1_Pin3_Pin4
General Purpose Output 1:
Hirose Pin 3, Pin 4.
H1_Pin7_Pin8
H1_Pin7_Pin8
General Purpose Output 2:
Hirose Pin 7, Pin 8.
Line Debouncing Period
lineDebouncingPeriod
Specifies the minimum length of an input line voltage
transition before recognizing a signal transition.
Available when the Line Selector is set to an input.
Each input line stores its own debouncing period.(RW)
Possible values are: 1 to 255 µs.
DFNC
Beginner
Line Inverter
Line Inverter
Controls whether to invert the selected input or output
line signal. (RW)
Beginner
True
True
Invert signal.
False
False
Do not invert signal.
Line Status
LineStatus
Returns the current status of the selected input or
output line. This is a polled feature that requires the
host to poll the camera for the latest value.(RO)
Beginner
True
True
Selected signal is high.
False
False
Selected signal is low.
Output Line Source
outputLineSource
Selects which internal signal or software control
state to output on the selected line. The pulse
is defined by
outputLinePulseDelay and
outputLinePulseDuration.(RW)
Note: the
Line Mode
feature must be set to
Output
.
DFNC
Beginner
Off
Off
The output line is open.
Software Controlled
SoftwareControlled
The value of the output line is determined by
outputLineValue,
outputLineSoftwareLatchControl
and / or
outputLineSoftwareCmd.
Pulse On: Start of
Exposure
PulseOnStartofExposure
Generate a pulse when the sensor actually
starts exposing its pixels. (Slight delay after
EXSYNC).
Pulse On: End of
Exposure
PulseOnEndofExposure
Generate a pulse when the sensor stops
exposing its pixels
.
Pulse On: Start of
Readout
PulseOnStartofReadout
Generate a pulse when the sensor starts
reading its pixels.
Pulse On: End of
Readout
PulseOnEndofReadout
Generate a pulse when the sensor stops
reading its pixels.
Pulse On: GP Input 1
PulseOnInput1
Generate a pulse when the General Purpose
Input 1 goes active.
Pulse On: GP Input 2
Pulse OnInput2
Generate a pulse when the General Purpose
Input 2 goes active.
