Teledyne Everywhereyoulook STREAMPRO, Руководство по развертыванию

Страница: 13 / 22

StreamPro Deployment Guide P/N 95B-6129-00 (August 2021)
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Page 11
To enable GPS communications with WinRiver II :
Select the Configure menu, Peripherals . Click the Add
button.
Choose
GPS , and then click Next . Choose the COM port
that the GPS is connected to.
Click
Next . Enter the GPS communication Baud Rate,
Parity, and Stop Bit settings.
Click
Next . Verify the port and communication settings.
Click Next .
Click Test Port and observe the messages.
Start WinRiver II .
Using the Measurement Wizard , select the checkbox
for Ext. GPS and configure the Com port and baud rate
to match that of the receiver.
Quick Review
Use the GPS Tabular 1 display Read Chapters 3, 6, and 13 in the
WinRiver II Users Guide.
Use WinRiver II to verify that the ADCP is
receiving GPS data