Teledyne 440, Системное руководство, Страница: 94 / 256

5 – Operating Software
5-28 © Teledyne TSS DPN 402196 Issue 4.1
Run Window tools
Table 5-8 shows and explains the command buttons on the Run Window toolbar. You may also access
some of the button functions by pressing the appropriate function key from the Run Window. See
section 5.3.5 "Function Keys" on page 5-28 for a list of all the available function keys that you may use
in the 440 mode.
5.3.5 Function Keys
The section 5.3.1 "Menu commands" on page 5-11 explains the menu commands and toolbar buttons
available from within DeepView for Windows. You may access some of these commands and tools
directly by pressing the appropriate function key on the SDC. As a simple memory aid, press the
function key [F1] to see the help dialog panel shown in
Figure 5-15 . Note that this dialog panel is NOT
part of the DeepView for Windows on-line Help support.
Press any key to close the help dialog panel.
Table 5-8: Run Window Toolbar
Button Function Explanation
Annotations This button opens the text annotation feature available when you are cre-
ating an internal logging file. You may use the feature to add text com-
ments, of up to 40 characters in length, to the file. The comments will
appear in the status bar during replay of the file. The feature will not be
available unless you have configured DeepView to generate an internal
logging file.
Help This button has a toggle action that opens and closes the DeepView
function help panel described in
section 5.3.5 "Function Keys" on
page 5-28
.