Teledyne 2243800-460 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 31

Teledyne 2243800-460 Скачать руководство пользователя страница 31

Use and disclosure shall be in accordance with the proprietary information notice and DCS on page i.

UG2243800-4XX

May 28, 2019

P a g e

|

30

❖

“Disable Radios”

(See also

“Restore

Radios”

below)

:

Allows the operator to temporarily disable the radios.
This effect is immediate and does not require a reboot.
While disabled, no diagnostic tests involving the radios
can be performed since power will not be applied to the
radios at any time. This setting is persistent through
power recycles. This procedure is located in Section 4

–

Disable Radios.

❖

“Restore

Radios”

(See also

“Disable Radios”

above)

: This

menu option will appear here if the radios had been
previously disabled using the

“Disable

Radios”

option

above. If the radios were originally listed as  enabled in
the configuration file, the radios will become  enabled.
However, if the radios were listed as disabled  in the
configuration file, the radios will remain disabled.  This
procedure requires a reboot. This procedure is  located in
Section 4

–

Enable Radios.

❖

Power On Self Test

: For Teledyne Controls Engineering

use only.

«
...
29
30
31

Содержание 2243800-460
































Отзывы:

Нет отзывов