Teledyne 2103, Инструкция по установке и эксплуатации

Страница: 28 / 94

2103 Modem Module
Section 2 Preparation and Installation
2-14
2.7 Pushed Data
Capability
The 2103 can automatically send data to a designated server
r u n n i n g I s c o F l o w l i n k P r o s o f t w a r e , u s i n g 1 x R T T
p a c k e t - s w i t c h e d d a t a t r a n s m i s s i o n ( 2 1 0 3
C
) , G P R S
packet-switched data transmission (2103
G
), or a modem listener
feature for bridging landline connections (2103). The user-spec-
ified primary data transmission interval (5 minutes to 24 hours)
can automatically change to a secondary interval when specific
site conditions occur at the monitoring site. An Oracle® or
Microsoft® SQL database is required to use this feature. Contact
the factory for additional information.
To use the data push capability, you need to make sure you are
connected to the modem module, and then select the Data tab
(Figure 2-11).
Figure 2-11 Data tab
Click the Pushed Data button to set up a schedule for the data to
be pushed to a Flowlink Pro server.
Detailed Flowlink instructions are beyond the scope of this
manual. Flowlink’s operating instructions are available in a
Windows Help format. You can access the Help topics for an
active window by clicking its
Help button or by pressing F1 on
your computer’s keyboard. You can also access Help topics by
selecting Help from the Flowlink menu.