Classification
Revision
Public
G
Document ID
Print date
14-1276-11
2020-09-21
1
Introduction
Congratulations on having purchased a Teledyne SP Devices digitizer product. To get the most out of
the digitizer we recommend that you read the documentation set carefully.
Disclaimers and Safety
Caution!
Ground the antistatic package before removing the device from the package. Electrostatic
discharge may damage the card. Be sure to ground yourself by touching the grounded
frame and avoid touching any components on the card.
Caution!
Before connecting any equipment to the digitizer, please check the absolute maximum
ratings in the digitizer data sheet to assure that the connected equipment cannot damage
the digitizer.
2
Installing the Software
To install the software development kit (SDK), run
TSPD-SDK-installer_rXYZAB.exe
(where XYZAB
denotes the version number of the SDK) found on the USB flash drive delivered with the digitizer. This
will install all software, including drivers, and add shortcuts to the start menu.
Important
Make sure the digitizer is connected to the host computer before you begin the installation process.
1.
The screen below is shown when the installer is started.
2.
Press
Next
to continue.
ADQ — Quick Start Guide for Windows
Page 1 of 10
