Teledyne RD Instruments SENTINEL V REAL-TIME, Руководство по эксплуатации

Страница: 234 / 343

September
2017 Sentinel V SC and RT Operation Manual
Page 218
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
EZ – Sensor Source
Purpose Selects the source of environmental sensor data.
Format EZcdhprst
Default EZ1111101
Recommended Setting. The default setting for this command is recommended for most applications.
Range Firmware switches (see description)
Description Setting the EZ-command firmware switches tells the Sentinel V Real-Time to use data from
a manual setting or from an associated sensor. When a switch value is non-zero, the Senti-
nel V Real-Time overrides the manual E-command setting and uses data from the appro-
priate sensor. If no sensor is available, the Sentinel V Real-Time defaults to the manual E-
command setting. The following table shows how to interpret the sensor source switch set-
tings.
Table 29: Sensor Source Switch Settings
Field Value = 0 Value = 1
c Speed Of Sound Manual EC Calculate using ED, ES,
and ET
d Depth Manual ED Internal Pressure Sensor
h Heading Manual EH Internal Heading Sensor
p Pitch (Tilt 1) Manual EP Internal Pitch Sensor
r
Roll (Tilt 2) Manual ER Internal Roll Sensor
s Salinity Manual ES N/A
t Temperature Manual ET Internal Transducer
Sensor
Example EZ1111101 means calculate speed of sound from readings, use pressure sensor, transducer
heading, internal tilt sensors, and transducer temperature.