TELEDYNE OLDHAM SIMTRONICS OLCT 80 d, Руководство пользователя

Страница: 111 / 116

OLCT 80
GAS TRANSMITTER
USER MANUAL
NPO80GB
Revision F.1
105
[Ex ia IIIC Da]
T.Amb : -20°C to 60°C
WARNING: Do not open when energized. After de-energizing, delay 2 minutes before
opening. Read user manual (cable glands).
On the remote sensor:
OLCT 80 WD id
CE0080
INERIS 03ATEX0240X
II 1 G D
Ex ia IIC T4 Ga
Ex ia IIIC T135°C Da
T.Amb : -20°C to 70°C
14.11 Side label
This label shows the following :
Id. Description
1. Thread diameter and pitch of the cable entries (here 2x M20 and 1x
M25)
2. P/N of transmitter (here OLCT80 d variant) without the sensor cell
3. S/N of transmitter : first two digits (here 17) correspond to the year of
construction (here 2017).
4. Recycling symbol
14.12 For the Handheld Unit IR20
Special instructions for use in ATEX Explosive Atmospheres:
•
In ATEX zones 1 and 2, the use of the protective case is mandatory to avoid any risk of
electrostatic discharges. The batteries must be replaced with batteries that are identical to
those indicated by TELEDYNE OLDHAM SIMTRONICS.
•
The operating temperature is between - 40° C and + 70 °C.
The marking of the IR20 handheld is as follows:
TELEDYNE OLDHAM SIMTRONICS, ZI EST,
ARRAS FRANCE
IR20
INERIS 04ATEX0011X
2
3
1
4