TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook MultiFlame DF-TV7, Руководство по эксплуатации

Страница: 40 / 64

MULTIFLAME DF-TV7
OPTICAL FLAME DETECTOR
OPERATING MANUAL
34 NOSP17662
Revision 03
6.6 Wireless communication tool TLU600
All settings and tests of detectors can be done by the wireless communication tool TLU600.
This communication tool and its software are compatible with all TELEDYNE OLDHAM
SIMTRONICS detectors: MultiFlame, MultiTox and MultiXplo.
Communication is made via infrared link (IrDA), similar but more efficient than infrared links for
computers. IrDA head should not be placed facing the sun as it significantly reduces the
communication with the TLU600.
Please refer to the wireless communication tool operating manual for more details
When the detector communicates with the TLU, the green LED blinks at 1Hz so
that the user can easily identify the detector in communication mode.
The TLU600 menu is composed of 2 access levels allowing both settings and obtaining
information about detector’s status.
•
level 1: exploitation
•
level 2: Maintenance
6.6.1 Main screen
The main screen is composed into several data fields.
C 1 C 2 C 3 C
C 4 1
C 5 0
C 6 | C 7 | C 8 | C 9
•
C1: Detector name field
• C2: Field blank if normal operation; INH- if inhibited
•
C3: Field blank if normal operation; FLT- if at least one fault has occurred
• C4: State of detection: no detection, cartridge fault
•
C5: State of alarm: alarm, no alarm
• C6, C7, C8 and C9: Name of keys F1, F2, F3 and F4
•
C10: Wireless communication tool pictograms