WaveSurfer 4000HD Rackmount Accessory
5.
Remove the outside top two screws from the back of the oscilloscope body
using the T10 Torx driver.
6.
Use the remaining two M4x10 Phillips screws to attach the positioning
brackets to the side plates behind the body of the oscilloscope.
Use the two M3x12 Phillips screws to secure the positioning brackets to the body
of the oscilloscope.
CAUTION: Do not block the
cooling vents on either side
or back of the oscilloscope.
7.
Install the fully assembled rackmount into your equipment rack following your
manufacturer’s instructions.
Contact Us
For a complete list of Teledyne LeCroy offices by country, including our sales and
distribution partners, visit: teledynelecroy.com/support/contact
© 2021 Teledyne LeCroy, Inc. All rights reserved.
WaveSurfer and Teledyne LeCroy are trademarks of Teledyne LeCroy, Inc. Other product or brand names are
trademarks or requested trademarks of their respective holders. Information in this publication supersedes all
earlier versions. Specifications are subject to change without notice.
Unless otherwise specified, all materials and processes are compliant with RoHS Directive 2011/65/EU in its
entirety, inclusive of any further amendments or modifications of said Directive. For the full list of current
certifications, see the EC Declaration of Conformity shipped with the product.
933085-00 Rev A
wavesurfer-4000hd-rackmount-instructions.pdf
February, 2021
4
WaveSurfer 4000HD Rackmount Accessory
Thank you for purchasing a Teledyne LeCroy WaveSurfer 4000HD rackmount
accessory. Please review these instructions before installing the rackmount.
Parts
The rackmount kit is shipped with the following parts. Contact our Customer Service if
parts are missing.
Parts
QTY
Face plate
1
Handles for face plate
2
Base plate
1
Side plates (1 ea. left and right)
2
Positioning brackets
2
M3x12 pan-head Phillips screws
2
M4x10 pan-head Phillips screws
16
M5x10 pan-head Phillips screws
4
Note: The kit does
not
include the fasteners needed to attach the rackmount to your
rack. Consult your rack manufacturer regarding the appropriate type, size and number
of fasteners required to install the rackmount securely.
Tools
You will need a Phillips screwdriver and a T10 Torx driver to attach the rackmount to
the oscilloscope.
Dimensions
The rackmount is designed to occupy 7U of a standard EIA 19-inch rack.
Installed Dimensions
Metric
English
Weight
7.9 kg
17.42 lbs
Height
310 mm
12.20 in
Width at face plate
480 mm
18.90 in
Width behind face plate
430 mm
16.93 in
Depth with handles
210 mm
8.27 in
Depth without handles
142 mm
5.59 in
933085-00 Rev A
1
