Teledyne Lecroy WaveSurfer 3000 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 97

Teledyne Lecroy WaveSurfer 3000 Скачать руководство пользователя страница 65

Operator's Manual

Analysis

Most Teledyne LeCroy oscilloscopes calculate measurements for all instances in the acquisition, enabling you to rapidly
and thoroughly analyze a long memory acquisition of thousands or millions of parameter values to find anomalous
measurements, or to apply a variety of mathematical functions to the waveform trace.

searches a single acquisition for events that meet specific criteria, enabling you to zoom in on anomalies in

the waveform, or scans multiple acquisitions with allowable trigger actions when conditions are met. It can also be used
to filter measurements. A variety of views help you understand the behavior of waveforms.

facilitates analysis by enabling you to quickly return the waveform display to any point in an acquisition.

Optional software packages may be purchases that simplify specialized analysis, such as various Serial Data Decode
options. These add new methods to those available on the oscilloscope Analysis menu.

WaveScan

The WaveScan® Search and Find tool enables you to search for unusual events in a single capture, or to scan for a
particular event in many acquisitions over a long period of time. Each

is optimized to find a different type of

event. The results are time stamped, tabulated, and can be selected for individual viewing.

WaveScan window with all scan "views" turned on.

Customize the presentation by choosing different WaveScan display features, or

. Optionally, set Actions to

occur automatically when unusual events are found, such as stopping the acquisition or sounding an alarm.

NOTE

: Whenever WaveScan is enabled, the instrument reverts to Real-time sampling mode.

923648 Rev A

59

«
...
63
64
65
66
67
...
»

Содержание WaveSurfer 3000


































































































Отзывы:

Нет отзывов