Operator’s Manual Simple TrueArb
Application
33
As mention
ed, the display is 7” capacitive touch screen display and you can
use the gestures like in a
mobile phone:
If you use the Swipe up or down gesture on the
Waveform Area
you can switch between
the Output Channel 1, Output Channel 2
, …,
Output Channel N page.
If you use the Swipe left or right gesture on the
Sequencer Area
you can navigate through
the sequencer entries.
Sequencer Area
The sequencer starts by default with a single entry with a Sine Waveform. You can touch on the
“Add
Entry Button” to insert
a new entry into the sequencer.
The TrueArb inserts by default a Sine waveform into the new Entry
To modify the waveform of an entry of the sequencer, you can touch the waveform dropdown list that
will open showing a list of all the waveforms
available in the “Waveform List”
(predefined or imported).