Teledyne Lecroy HVD3102, Руководство оператора

Страница: 7 / 40

Operator's Manual
Safety
Follow these instructions to keep the probe operating in a correct and safe condition. Observe
generally accepted safety procedures in addition to the precautions specified in this section.
The
overall safety of any system incorporating this product is the responsibility of the
assembler of the system.
Symbols
These symbols appear on the probe or in documentation to alert you to important safety
considerations.
CAUTION of damage to instrument, or WARNING of hazard to health. Attend to the
accompanying information to protect against personal injury or damage. Do not
proceed until conditions are fully understood and met.
HIGH VOLTAGE WARNING . Risk of electric shock.
ESD CAUTION. Risk of electrostatic discharge (ESD) that can damage the instrument if
anti-static measures are not taken.
Double Insulation
Measurement Ground
Precautions
Avoid personal injury or damage to your equipment by complying with the following safety
precautions:
Use only as specified . The probe is intended to be used only with compatible Teledyne LeCroy
instruments. Use of the probe and/or the equipment it is connected to in a manner other than
specified may impair the protection mechanisms.
Do not overload; observe all ratings. To avoid electric shock or fire, do not apply any potential
that exceeds the maximum rating of the probe and/or the probe accessory, whichever is less.
Observe all terminal ratings.
923278-00
1
www.
GlobalTestSupply
.com
Quality Teledyne Lecroy Products Online at: sales@GlobalTestSupply.com