Teledyne Lecroy Frontline Sodera LE, Быстрый старт, Страница: 7 / 9

Frontline Technical Support: Frontline_TechSupport@Teledyne.com
On the Wireless Protocol Suite Toolbar, clicking on the Stop Record button, or selecting Stop Recording from the
Capture menu options will halt live capture. From the Main window you can click the Stop Record button or
select Stop Recording from the Captur e menu list to stop recording as well.
The Device Database View populates with any newly discovered devices. Selecting devices for analysis can be done while recording.
The
Security
View will show all encrypted Bluetooth links.
The
Event Log
View will begin to populate with information, warnings, and error messages.
The
Status Bar
will show a running total of captured packets.
Note: Starting a new capture session will clear all unsaved data from both the Sodera hardware and the
Wireless Protocol Suite . If it has not been saved, then a pop-up warning message will appear.
8. Selecting Devices for Analysis
Once a capture session starts by clicking on
Start Record
on the Main Window Toolbar, data from all active devices within range or
data from wireless or wired connections is being captured. To analyze the data using the Wireless Protocol Suite , select specific
devices of interest to include in the analysis.
In the
Device Database
view, place a check in the row of each active device to be analyzed. Active devices can also be selected
while the recording is in process.
Note: Data filtered by the device selection is an “OR” function, not an “AND” function. When selecting device1,
device2, device3,... the recorded data filtered into the analyzer is data involving device1 OR device2 OR device3
OR .... However, if in the Options menu, analysis of LE Empty packets is selected, an AND function is included.
For example: (device2 AND LE Empty packets) OR (device3 AND LE Empty packets).
The following table lists some common data capture and device selection scenarios.
Once Devices are selected, analysis of the capture can begin.
9. Starting Analysis
The analysis begins by clicking on the
Start Analyze
button in the Wireless Protocol Suite Main window. The
Sodera LE analyzer will begin sending captured packets involving the selected device to the Wireless Protocol
Suite .
Once analysis has begun, you cannot change the device selection. All device rows in the
Device Database
View are
grayed-out. To stop the analysis, click on the
Stop Analyze
button. You can then change your device selection and
restart analysis by clicking on the
Start Analyze
button.
To stop the analysis, click on the button in the Sodera datasource or click the button on
the Wireless Protocol Suite Main window You can also select the
Stop Analyze
option in the
Capture
menu in the Sodera datasource
or
Stop Analyzing
option in the
Capture
menu in the Main window as well.
Conducting analysis from a capture file is identical to the live capture method.
Wireless Protocol Suite : Main Window
Wireless Protocol Suite : Main Window