Frontline Technical Support: Phone +1-434-984-4500 or email [email protected]
Device Under Test Connection
1. Insert the Device under Test (DUT), such as a micro SD MMC memory card into the slot on the IC board ().
Device Under Test Connection Setup
2. Insert the other end of the IC board into the SD slot on the test PC ().
Plugging IC Board to the Analysis PC
That is the complete hardware setup if you are using a memory card. It is different if you want to connect directly to the Pin
Header.
Pin Header Connection
In addition to using the standard connection, you can also connect directly to the Pin Header on the IC board. To do that, follow the wire
schematic in , below.