Components
The Teledyne LeCroy PCI Express Gen3 x4 Slot to M.2 Adapter with
SMBus Support card kit has the following components:
•
PCI Express Gen3 x4 Slot to M.2 (M-Key or B-Key
depending on configuration) Adapter with SMBus Support
card
•
Thumbscrew, standoff and locknut
•
Power supply 12V @ 3A
•
User Manual and Quick Start Guide (this document)
Inspect the received shipping container for any damage. Unpack the
container and account for each of the system components listed on the
accompanying packing list. Visually inspect each component for absence
of damage. In the event of damage, notify the shipper and Teledyne
LeCroy. Retain all shipping materials for shipper’s inspection.
The adapter can be used with a standard Teledyne LeCroy PCIe
®
interposer and Teledyne LeCroy analyzer to capture all PCIe data traffic
passing through the interface, allowing visibility to virtually all types of
protocol problems that may affect device performance or reliability. The
adapter supports side band signals such as PERST#, WAKE#, CLKREQ#
and SMBus (SMBCLK, SMBDAT).
In addition, if an M.2 host port is available, Teledyne LeCroy offers
specialty interposers designed for M.2 devices that can be used as a
direct traffic probe and analysis tool with any of our Summit™ product
family of analyzers.
2
Installation
Insert the DUT into the M.2 connector on the adapter and secure the DUT
with the thumbscrew, standoff and locknut. The thumbscrew can be
removed by hand. The locknut can be removed with a nut driver (see
drawings below).
Once the DUT is properly installed in the adapter you can plug the
adapter in to a PCIe slot.
3
Содержание Express Gen3 x4
Страница 3: ...Exploded View Installed Side Profile...
Страница 4: ...Installed...
