9
7
Use an appropriate length of the tubing to connect the rinse solution source to the fitting at
the top of this channel.
F
IGURE
14
Completed Rinse Station Tubing for the Oils Side
Assembling and Placing the Sample Vial Racks
Some styles of sample vial racks are shipped unassembled. You can easily assemble them
without using tools.
WARNING
PUNCTURE HAZARD
Never attempt to load, unload or reposition the sample vial rack or sample
vial while the autosampler is operating. The sample probe may move
unexpectedly and cause an injury.
1
Before loading or unloading any sample vial racks on the sample tray, park the sampling arm
and probe in the home position. The home position is the initial position at power up.
2
If necessary, assemble the racks as shown in the instructions included with each rack.
3
Place the first sample vial rack at the extreme left-hand side of the sample tray. Place the
next sample vial rack to the right of the first rack, and so forth.
Connecting to the Analytical Instrument’s
Sample Port
You can connect the autosampler directly to a sample introduction peristaltic pump and then
to a nebulizer or other sample introduction device.
From Rinse
Solution Source
To Waste Container
