Teledex Opal Series 2006 Скачать руководство пользователя страница 2

CONVERTING FROM DESK TO WALL MOUNT

The Opal series can be changed for wall mounting applications. The conversion is easiest
when the handset and line cords are not connected.
1) Located on the top of the telephone above the speaker grill is the wall/desk mount clip.

Remove this clip by firmly pushing upward (towards the hookswitch).

2) Flip the clip over (top to bottom) so that the protruding edge is towards the top of the 

phone. This edge will hold the handset.

3) Turn the Opal series over so the bottom is up facing you.  Place the Opal on a nonabra

sive surface to prevent scratching.

4) Locate and remove the mounting bracket, firmly push back and pull up to remove two 

of the four retaining tabs.

5) Rotate the mounting bracket 180 degrees clockwise so that the mounting eyelet on the 

bracket is facing in the same direction as the other mounting eyelet located on the bot
tom of the telephone.

6) Insert the top two retaining tabs of the mounting brackets into the mounting bracket 

slots (located near the middle of the telephone).  Then firmly push down to insert the 
retaining tabs on the opposite side of the mounting bracket.

7) Connect a short modular line cord into the jack on the back of the phone (labeled 

LINE).  Route the line cord through the line cord channel. Connect the other end of 
line cord to the phone jack on the wall mounting plate.

8) Turn the telephone over, and slide the Opal Series down onto the mounting posts in 

downward direction.  Both eyelets should line up with the mounting posts.

9) Complete the wall mounting by installing the handset and handset cord.

5

OPAL 2000 SERIES TELEPHONE DIAGRAM

CONTACTING TELEDEX

Telephone:

(408) 363-3100

Internet:

www.teledex.com

email:

[email protected]

Address:

6311 San Ignacio Avenue
San Jose, CA USA
95119

CONGRATULATIONS

,

AND THANK YOU

!

Congratulations on your purchase of this high quality Teledex Opal Series telephone.
Teledex is the world's leading hospitality telephone supplier, and backs this telephone with
our exclusive limited lifetime warranty. If you have any questions about this telephone or
the warranty, please contact us via one of the methods below. We appreciate your purchase! 

Содержание Opal Series 2006

Страница 1: ...ence in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction may cause harmful interference to radio communications However there is not a guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television receptio...

Страница 2: ...g bracket slots located near the middle of the telephone Then firmly push down to insert the retaining tabs on the opposite side of the mounting bracket 7 Connect a short modular line cord into the jack on the back of the phone labeled LINE Route the line cord through the line cord channel Connect the other end of line cord to the phone jack on the wall mounting plate 8 Turn the telephone over and...

Страница 3: ...THE HANDSET 1 Lift the handset The Opal will select the ringing line 2 To end the call hang up the handset 1 PROGRAMMING THE AUTO DIAL KEYS The Opal 2000 series has up to eleven 11 programmable AUTO DIAL keys Follow the steps below to program the keys to automatically dial telephone numbers or to activate tele phone system features To program the auto dial keys the telephone must be connected to a...

Страница 4: ...IPPED MODELS ONLY To activate the handset from speakerphone mode 1 Lift the handset from the cradle 2 The red SPEAKER LED will go out TO ACTIVATE THE SPEAKERPHONE FROM HANDSET MODE SPEAKERPHONE EQUIPPED MODELS ONLY 1 Press the SPEAKER key 2 The red SPEAKER LED will indicate speakerphone selection 3 Place the handset back into the cradle USING THE HOLD KEY The HOLD key places the call on hold local...

Отзывы: