3.7.2 Register handset
Manual register: press down
“
Page
”
key for 3 seconds, the line indicator begin quickly
flashing, the base unit enter into the register mode, and then press
“
*
”
key in the handset until
the phone give an
“
toot
”
prompt tone, release the
“
*
”
key, the handset enter into the register
mode, when the base and the handset matches successfully, and then the phone will give a beep
prompt sound. Every base unit most can register 5 handsets.
Auto register: the handset is on-hook status, place it into the plane with on-hook status,
keep charging piece of contact stability, the plane charging indicator will light up, the base and
the mobile phone enter registered mode at the same time, if registered success will give a
prompt sound.
3.7.3 Delete handset
Press
”
Page
”
key for 3 seconds, the line indicator begins quickly flash, the base unit enter
into register mode, and then press
“
line
”
key for seventh, when the line indicator stop flashing, all
of the registered handset are deleted. The phone will auto reboot.
3.8 Switches between base and handset
If the handset have registered with base unit, then the handset and base can switch freely;
from the handset switch to base can press
“
speaker
”
key in the base unit; press
“
ON/OFF
”
key in
the handset to switch from base to handset.
3.9 Switches between handsets
Every base unit can most register 5 handsets, if one of the handsets is picking up, the rest of
any one can press
“
ON/OFF
”
key to switch talking to the current using one, the
“
ON/OFF
”
indicator of the other handsets will flash to prove the phone is using; if have registered 5
handsets to the same base, and cannot register the sixth handset, the phone will give a warning
sound.
3.10 Speed dial function of the handset
The handset is under on-hook status:
Press down
“
1
”
key for 3 seconds to call the number stored in message on the base unit;
Press down
“
2
”
key for 3 seconds to call the number stored in M6 on the base unit;
Press down
“
3
”
key for 3 seconds to call the number stored in M7 on the base unit;
Press down
“
4
”
key for 3 seconds to call the number stored in M8 on the base unit;
Press down
“
5
”
key for 3 seconds to call the number stored in M9 on the base unit;
Press down
“
6
”
key for 3 seconds to call the number stored in M10 on the base unit;
If the base unit cannot store any number, these operations can only pick up with the handset.
