background image

To create a conference call by calling one party, while on an existing conversation:

1)

Receive call from first party.

2)

Place the first party on HOLD by pressing the HOLD key.

3)

Place call to second party using available, second line.

4)

Press the CONF key. All three parties will now be conferenced together.

To create a conference call when receiving both calls:

1)

Receive call from first party.

2)

Place the first party on HOLD by pressing the HOLD key.

3)

Receive call from second party.

4)

Press the CONF key. All three parties will now be conferenced together.

7.4 HANDSET VOLUME CONTROL

There are three (3) volume levels for the handset. To increase or decrease the handset

volume level, press the VOLUME UP or DOWN keys.

7.5 SWITCHING BETWEEN HANDSET AND SPEAKERPHONE

To switch from the handset to the speakerphone during a call, press the SPEAKER

key, and place the handset on the base. 

To switch from the speakerphone to the handset, lift the handset. The speakerphone

will automatically turn off.

7.6 ADJUSTING THE SPEAKERPHONE VOLUME

There are seven (7) volume levels for the speakerphone. To increase or decrease the

speakerphone volume level, press the VOLUME UP or DOWN keys.

7.7 USING A HEADSET

Plug a standard 2.5 mm headset plug into the headset jack on the right hand side of

the telephone. You may place and receive calls by pressing the “SPEAKER” key.

7.8 USING REDIAL

The redial function allows you to redial the number that was last dialed. Pick up the

handset, or press the SPEAKERPHONE button, and press the REDIAL key. The

number will be dialed automatically.

7.9 USING FLASH

The FLASH key supports various custom calling services. For example, if you have

subscribed to call waiting, press FLASH to answer an incoming call without

disconnecting the current call. Press FLASH again to return to the first call.

7.10 USING HOLD

To place a call on hold, press the HOLD key. The HOLD indicator flashes, indicating

the call is on hold. You can now hang up the handset without disconnecting the call.

To resume the call, press the LINE key of the call that is on hold. This will remove

the call from hold and make the call active once again. The LINE indicator LED will

return to a steady, in-use condition.

7.11 USING MUTE

To temporarily switch off the microphone of either the speakerphone or handset,

press MUTE. The MUTE indicator lights and the microphone turns off, but you can

still hear the person on the other end of your conversation. Press MUTE again to

resume your conversation.

7.12 STORING A NUMBER IN MEMORY

Follow these steps to program up to ten memory locations, for one-touch access to 

frequently-dialed numbers or special PBX/Centrex services or features. Each memory 

location can store up to 16 digits.

1)

Lift the handset, then press STORE.

2)

Enter the telephone number or string of digits you wish to store. Once

you have entered the entire number or string, press the memory button 

corresponding to the location where you would like the number stored.

7.13 DIALING A STORED NUMBER

Lift the handset or press the SPEAKER key, then press the desired memory key. The

telephone will automatically dial the stored number. 

8. MESSAGE WAITING

There is an oval-shaped LED at the top of the telephone that provides you with a

visual indication that you have a message. Consult your service provider or system

administrator for instructions on how to access these messages.

9. CARING FOR YOUR B220

Your B220 telephone is an example of superior design and craftsmanship. These

suggestions will help you care for your phone so you can enjoy trouble-free service

for many years.

1) Keep the phone dry. If it gets wet, wipe it dry immediately. Liquids can

contain minerals that may corrode the electronic circuits.

2) Use and store the phone only in normal temperature environments. Extreme 

temperatures can shorten the life of electronic devices and distort or melt plastic 

parts.

3) Keep the phone away from dust and dirt, which can cause premature wear of 

parts.

4) Handle the phone gently and carefully. Dropping it can damage internal circuit 

boards or external parts, and can cause the phone to work improperly.

Modifying or tampering with the phone’s internal components can cause a malfunc-

tion. If your phone is not performing as it should, see your distributor for assistance.

If the trouble is affecting the telephone lines, the phone company or service provider

may ask you to disconnect the phone until the problem is resolved.

6

7

Содержание B220








Отзывы: