3. INSTALLATION
3.1 DESKTOP INSTALLATION
1)
Plug one end of the handset coiled cord into the handset. Plug the other
end of the cord into the handset jack located on the left side of the phone
base. (Refer to figure 3.)
2)
Place the handset in the handset cradle.
3)
Plug one end of the supplied line cord into the LINE Jack on the bottom of
your phone. Then route the line cord through the left slot of the desk/wall
mount bracket.
4)
Plug the other end of the modular cord into the wall jack.
3.2 WALL MOUNTING
1)
Plug one end of the handset coiled cord into the handset. Plug the other
end of the cord into the handset jack located on the left side of the phone
base (please refer to figure 3.)
2)
Place the handset in the handset cradle.
3)
Remove the desk/wall mount bracket from the bottom of the B120. Rotate
the bracket 180º and re-install it into the four slots the bottom of the B120.
4)
Connect the short line cord into the LINE jack on the bottom of your
phone. Connect the other end of the line cord to the line jack on the wall
mount plate.
5)
Slip the phone onto the wall plate jack, lining up the wall mounting holes,
and then slide the telephone down so it is firmly in place.
3
HANDSET JACK
FIGURE 3
FIGURE 4
7.9 USING HOLD
To place a call on hold, press the HOLD key. The HOLD indicator flashes. You can
now hang up the handset without disconnecting the call.
To resume the call, press the HOLD key or SPEAKER key. This will remove the call
from hold and make the call active.
7.10 USING MUTE
To temporarily switch off the microphone of either the speakerphone or
hadnset, press MUTE. The MUTE indicator lights and the microphone turns off, but
you can still hear person on the other end of your conversation. Press MUTE again
to resume your conversation.
7.11 STORING A NUMBER IN MEMORY
Follow these steps to program up to ten memory locations, for one-touch access to
frequently-dialed numbers or special PBX/Centrex services or features. Each memory
location can store up to 16 digits.
1) Lift the handset, then press PGM.
2)
Enter the telephone number or string of digits you wish to store. Once
you have entered the entire number or string, press the memory button
corresponding to the location where you would like the number stored.
(NOTE: You may enter a one second Pause into a string of numbers you are storing
by pressing the REDIAL key while storing the number. Multiple Pauses may be pro-
grammed by pressing the REDIAL repeatedly, fo rthe required number of Pauses to
be inserted.)
7.12 DIALING A STORED NUMBER
Lift the handset or press the SPEAKER key, then press the desired memory key. The
telephone will automatically dial the stored number.
8. MESSAGE WAITING
There is an oval-shaped LED at the top of the telephone that provides you with a
visual indication that you have a message. Consult your service provider or system
administrator for instructions on how to access these messages.
9. CARING FOR YOUR B120
Your B120 telephone is an example of superior design and craftsmanship. These sug-
gestions will help you care for your phone so you can enjoy trouble-free service for
many years.
1) Keep the phone dry. If it gets wet, wipe it dry immediately. Liquids might
contain minerals that can corrode the electronic circuits.
2) Use and store the phone only in normal temperature environments. Extreme
temperatures can shorten the life of electronic devices and distort or melt plastic
parts.
3) Keep the phone away from dust and dirt, which can cause premature wear of
parts.
4) Handle the phone gently and carefully. Dropping it can damage internal circuit
boards or external parts, and can cause the phone to work improperly.
6