background image

REQUIREMENTS OF PART 68- FCC RULES

This device has been granted a registration number by the Federal Communications Commission, under Part
68 rules and regulations for direct connection to the telephone lines. In order to comply with these FCC rules,
the following instructions must be carefully read and applicable portions followed completely: 
1. Direct connection to the telephone lines may be made only through the standard modular cord furnished,
to the utility installed jack. No connection may be made to party or coin phone lines. On the bottom of the
phone is a label that contains among other information, the FCC Registration Number and the Ringer
Equivalence number (REN) for this equipment. If requested this information must be provided to the tele-
phone company. The USOC lack for this equipment is RJIIC. 
2. The telephone company, under certain circumstances, may temporarily discontinue and make changes in 
Facilities and services, which may affect the operation of the users’ equipment. However, the user shall be
given adequate notice in writing to allow the user to maintain uninterrupted service. 
3. In certain circumstances, it may be necessary for the Telephone Company to request information from you 
concerning the equipment which you have connected to your telephone line. Upon request of the telephone 
company, provide the FCC registration number and the ringer equivalence number of the equipment which is 
connected to your line; this information will be found on the device. 
4. If any of your telephone equipment is not operating properly, you should immediately remove it from the 
telephone line. It may cause harm to the telephone network. 
5. If the telephone company notes a problem, they may temporarily discontinue service. When practical, they
will notify you in advance of a disconnection. If advance notice is not feasible, the telephone company must:
promptly notify you of such temporary discontinuance; afford the opportunity to correct the condition;
inform you of your rights to bring a complaint to the FCC under their rules. 
6. Repairs to the device may be made only by the manufacturer or an authorized service agency. This applies
at any time during and after warranty. If unauthorized repair is performed, registration, connection to the
telephone lines and remainder of warranty period all becomes null and void.
7. This equipment is hearing aid compatible. 
8. This telephone must be connected behind a PBX.

REQUIREMENTS OF PART 15 - FCC RULES

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction, may cause harmful inter-
ference to radio communications. However, there is not a guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: 1) Move the telephone away from 
the receiver. 2) Consult the dealer or an experienced radio/TV technician for help. Any changes made by the
user not approved by the manufacturer can void the user’s authority to operate the telephone.

INDUSTRY OF CANADA REQUIREMENTS

NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equip-
ment meets certain telecommunications network protective operational and safety requirements as prescribed
in the appropriate Terminal Equipment Technical Requirements documents. The department does not guar-
antee the equipment will operate to the user satisfaction. Before installing this equipment, users should ensure
that it is permissible to be connected to the facilities of the local Telecommunications Company. The equip-
ment must also be installed using an acceptable method of connection. The customer should be aware that
compliance with the above conditions may not prevent degradation of service in some situations. Repairs to
certified equipment should be coordinated by a representative designated by the supplier. Any repairs or 
alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment. Users should ensure for their own protection
that the electrical ground connections of the power utility, Telephone lines, and internal metallic water pipe
systems, if present, are connected together. This precaution may be particularly important in rural areas. 
Caution: Users should not attempt to make such connections themselves, but should contact the appropriate
electric inspection authority or electrician, as appropriate. The Ringer Equivalence Number (REN) of this
device is Z. 
Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of
the maximum number of terminals allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed 5. This telephone connects to the telephone
network under the connecting arrangement code CA11A. 

IMPORTANT SAFETY INSTRUCTIONS 

WHEN USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS.
INCLUDING THE FOLLOWING: 

1. READ AND UNDERSTAND ALL INSTRUCTIONS. 

2. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE PRODUCT. 

3. UNPLUG THE PRODUCT FROM THE WALL OUTLET BEFORE CLEANING. DO NOT USE LIQ-
UID CLEANER OR AEROSOL CLEANERS. USE A DAMP CLOTH FOR CLEANING. 

4. DO NOT USE THIS PRODUCT NEAR WATER, FOR EXAMPLE: NEAR A BATHTUB, WASH BOWL,
KITCHEN SINK OR LAUNDRY TUB, IN A WET BASEMENT, OR NEAR A SWIMMING POOL. 

5. DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND OR TABLE. THE PRODUCT
MAY FALL, CAUSING SERIOUS DAMAGE TO THE PRODUCT. 

6. SLOTS AND OPENINGS IN THE CABINET AND THE BACK OF BOTTOM ARE PROVIDED FOR
VENTILATION. THESE OPENINGS MUST NOT BE BLOCKED OR COVERED. THE OPENINGS
SHOULD NEVER BE BLOCKED BY PLACING THE PRODUCT ON A BED, SOFA, RUG OR ANY
OTHER SIMILAR SURFACE. THIS PRODUCT SHOULD NEVER BE PLACED NEAR OR OVER A
RADIATOR OR HEAT REGISTER. THIS PRODUCT SHOULD NOT BE PLACED IN A BUILT-IN
INSTALLATION UNLESS PROPER VENTILATION IS PROVIDED. 

7. NEVER PUSH OBJECTS OF ANY KIND INTO THIS PRODUCT THROUGH CABINET SLOTS AS
THEY MAY TOUCH DANGEROUS VOLTAGE POINTS OR CAUSE A SHORT CIRCUIT THAT
COULD RESULT IN A FIRE OR ELECTRIC SHOCK. NEVER SPILL LIQUID OF ANY KIND ON THE
PRODUCT. 

8. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT DISASSEMBLE THIS PRODUCT. IF SER-
VICE IS NECESSARY, SEND OR TAKE THE TELEPHONE TO A QUALIFIED SERVICE FACILITY.
OPENING OR REMOVING COVERS MAY EXPOSE YOU TO DANGEROUS VOLTAGES OR OTHER
RISKS.  INCORRECT REASSEMBLY CAN CAUSE ELECTRIC SHOCK WHEN THE APPLIANCE IS
SUBSEQUENTLY USED. 

9. UNPLUG THIS PRODUCT FROM THE WALL OUTLET AND REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL UNDER THE FOLLOWING CONDITIONS: 

IF THE POWER SUPPLY CORD OR PLUG IS DAMAGED OR FRAYED

IF LIQUID HAS BEEN SPILLED INTO THE PRODUCT 

IF THE PRODUCT HAS BEEN EXPOSED TO RAIN OR WATER 

IF THE PRODUCT DOES NOT OPERATE NORMALLY BY FOLLOWING THE OPERATING 
INSTRUCTIONS. ADJUST ONLY THOSE CONTROLS THAT ARE COVERED BY THE OPERAT
ING INSTRUCTIONS, AS IMPROPER ADJUSTMENT OF OTHER CONTROLS MAY RESULT IN
DAMAGE AND WILL OFTEN REQUIRE EXTENSIVE WORK BY A QUALIFED TECHNICIAN 
TO RESTORE THE PRODUCT TO NORMAL OPERATION. 

IF THE PRODUCT HAS BEEN DROPPED OR THE CABINET HAS BEEN DAMAGED. 

IF THE PRODUCT EXHIBITS A DISTINCT CHANGE IN PERFORMANCE. 

10. AVOID USING THE TELEPHONE DURING AN ELECTRICAL STORM. THERE MAY BE A
REMOTE RISK OF ELECTRIC SHOCK FROM LIGHTNING. 

11. DO NOT USE THE TELEPHONE TO REPORT A GAS LEAK IN THE VICINITY OF THE LEAK. 

6

7

Содержание B100








Отзывы: