manualshive.com logo in svg

Telect ELF-0005-0001, Руководство пользователя

Поделиться
Скачать
Telect ELF-0005-0001 Скачать руководство пользователя страница 17

© Telect, Inc.,  All Rights Reserved, 124317-10 A0

1.509.926.6000  ::  telect.com

14

ELF System

Copper / Fiber

  ::  ELF Family

1.5.3 Inspection

Compare the contents of the ELF shipping container(s) with the packing list. Call Telect if you are missing anything. 

Telect is not liable for shipping damage. 

If the shipping container is damaged, keep it for the carrier’s inspection. Notify the carrier and call

Telect at 1-509-926-6000. 

Keep the container until you have checked equipment operation. If you experience any kind of

problem, call Telect’s Customer Service Department. Use the original, undamaged container if

you are instructed to return the ELF equipment to Telect.

1.5.4 Technical Support (USA)

Please read and understand all instructions before starting installation. If you have questions, contact Telect  

Technical Support at [email protected] or call 1.509.926.6000. 

 

When you receive the equipment, carefully unpack it and compare it to the packaging list. Please report any  

defective or missing parts to Telect Quality at [email protected] or call 1.509.926.6000. 

 

Telect is not liable for transit damaged. If the product is damaged, please report it to the carrier and contact  

Telect Quality.

1.6 Specifications

E1 Specification

T1 Specification

Return Loss

12 dB 51 kHz to 102 kHz

18 dB 102 kHz to 2048 kHZ

14 dB 2048 kHz to 3073 kHz

26 dB 772 kHz

Insertion Loss

0.5 dB at bit rate (2.048 Mbps)

0.5 dB at bit rate (1.544 Mbps)

Monitor Level

–20 dB ± 1.5 dB at bit rate (2.048

Mbps)

–20 dB ± 1.5 dB at bit rate (1.544

Mbps)

Contact Resistance

<0.01 Ohms

Characteristic Impedance

100/120 Ohms

Adjacent Channel Crosstalk

-60 dB at bit rate (2.048 Mbps)

-60 dB at bit rate (1.544 Mbps)

Interchannel Crosstalk

-60 dB at bit rate (2.048 Mbps)

-60 dB at bit rate (1.544 Mbps)

Table 1 - DS1 Electrical

Содержание ELF-0005-0001

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды