Telect 0HPGMT Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 20

Telect 0HPGMT Скачать руководство пользователя страница 7

High-Power GMT Series Fuse Panels

Models 0HPGMT Installation Guide

© Telect, Inc. All rights reserved. 5.1.17 130316-7
1.509.926.6000 :: telect.com

7

1.1.2 Standard & Special Features

The following table compares the features of all standard 0HPGMT panels. All panels include a rear or front
transparent cover and most, except as footnoted in the following chart, can be mounted in either 19" or 23"
racks. The sections that follow briefly describe some of the standard and special features included with
these panels. Custom combinations of features are available. Please contact the Telect inside sales team
at 509.926.6000.

Table 1 - Product Comparison Chart

Model Number

Fuse Array

-48 VDC

Noise Filter

0HPGMT05R

Dual 10/10

X

0HPGMT05NR

X

X

0HPGMT12R

ᵃ

X

0HPGMT03R

Dual 15/15

X

0HPGMT02R

ᵇ

Dual 20/20

X

0HPGMT10R

Single 10

X

0HPGMT08R

Single 20

X

0HPGMT07R

Single 30

X

a. Full front access, 2RU

b. 23" only

GMT fuses are available in capacities ranging from 0.18A to 15A. A unique feature of the Telect High-Power
GMT Fuse Panel is that the fuse positions are oriented so the identification flags face down to accommodate
easy location of a blown fuse when the panel is at the top position of a relay rack or bay. (GMT splash covers
are optional for maximum safety when fuses blow.)

Another unique feature of the GMT panels is a small hole below each fuse position to accommodate color-
coded optional designation pins. Designation pins are useful for quickly identifying required fuse positions and
rating of the fuses. The panel is delivered with “dummy” fuses in all positions.

The standard front panel includes dual-color LEDs for power
and failure alarms on the face of an easily removable/
replaceable alarm card:

•

The POWER LEDs are green when power is on and red
when power to that side goes off.

•

The FAIL ALARM LED is green when all installed fuses
are OK and red when any installed, operable fuse blows
or if either A or B power goes off.

Figure 3 - Alarm Panel

«
...
5
6
7
8
9
...
»

Содержание 0HPGMT





















Отзывы:

Нет отзывов