Telecrane F25, Руководство по установке и эксплуатации

Страница: 19 / 32

16
3-4 Power Supply and Change power supply voltage
F25 receiver provides with 4 kinds of Transformer (24V/42V/230V
、
48V/110V/220V
、
110V/220V/380V
、
48V/220V/380V) that allows user to choose
based on the power input on site and the designated voltage will be set when the
receiver is made in factory.
Changing power supply voltage
3-4-1 Disconnect the power of receiver.
3-4-2 Remove the connector plug of the transformer from its original position.
3-4-3 Insert the connector plug into the new position.
3-4-4 Complete the procedure.
Note:
Users are allowed to select the different power source according to the respective
requirement. However, the transformer must be changed. Please check with your
local distributor for replacement of the transformer if necessary.
3-5 Remote Channel Changing and Remote Pairing
Note:
Before operating, one must make sure that the communication status between
transmitter and receiver is at good condition.
3-5-1 Remote Channel Changing
Remote Channel Changing allows the transmitter to notify the receiver to perform the
channel changing by radio remotely. After receiving the command from the
transmitter, the receiver will automatically search and select a clear and suitable
channel of frequency. In the mean time, the channel of frequency selected by the
receiver will be sent back to transmitter and replace the original channel with this
new one. The followings are the procedure of Remote Channel Changing: