24
Tele
Corder
# TCwL-B4, V2.43, Revision 4, USA
10. Notes
1.
The
TCwL-B4
recorder comes with a factory-set master password, which is in the machine
code
that is set by its hardware. This password is written on a sheet that comes with the recorder and will be
an effective password forever (keep this password in a
secure
place).
If
you lose the master password,
your
Tele
Corder
may have to be returned to a factory authorized service facility to determine what the
password is from its internal hardware.
2.
The recording ports (channels) are set for audio activated recording by default. Depending
on what you are recording, phone, phone line, radio, you may have to change the factory settings.
3.
When recording from phone lines, the
VAR port
boxes should not have a check in them. The
VAR voltage threshold
,
Turn Off Delay
, and
Time Out
will have no effect on operation in this
mode. All other settings are functional in this mode.
4.
Recording in audio activated mode may require adjustment of the recorder to the quality
of your audio source. If the audio is weak… adjusting the Voltage Threshold more sensitive or
the
Turn Off Delay
a little longer will stop the chopping of files, or multiple files for a single
recording. If recording continuously the opposites would apply, less sensitive and a shorter delay.
5.
The
Audio Recording Mode
is set at small file good audio as default. In this mode the audio
quality is good and the compression rate will give you approximately 11,000 hours of recordings on the
recorders internal HDD and the ability to view the last 65,000 calls.
6.
Avoid shaking the
Tele
Corder
, and keep it in an environment with moderate temperature and
humidity that is suitable for electronic equipment.
7.
There are no user-serviceable parts inside of the recorder. Refer servicing to qualified service
personnel.
If the
clock
does
not
maintain the correct time and date without external power, an internal
battery may need to be replaced (Battery # CR1220).
8.
Do not expose to rain or moisture.
9.
If your
Tele
Corder
came with software V2.43, it is compatible with PC running either 32 bit or
64 bit Operating Systems (OS). If you have an older
Tele
Corder
that came with software V2.41 or
earlier, it would have shipped with its device driver PID (Product I.D.) set for use with Windows PC
running 32 bit operating systems (OS). To use the older recorders with a Windows 64 bit OS,
the device driver PID setting needs to be changed from 6006 to 6001. To update the older recorder for
use with 64 bit OS (Win-2000 to Win-7), install the older
Tele
Corder
on a 32 bit PC and run the
"
SetUsbPidForV242PackOnAllOS.exe
” file that is on the software CD supplied with the new
recorder or V2.43 software that can be download from the Omnicron Electronics Web —
www.omnicronelectronics.com
.
After the PID is changed to 6001 the recorder will be compatible with software V2.42 and V2.43
on a PC running either a 32 bit or 64 bit OS (the same as recorders supplied with V2.43). See:
"Read-
me"
file on software CD or software download for additional information.
11. User Notes
Password
_________________________
Serial
No. _________________________
Doc:
Tele
Corder
TCwL-B4 — Version 2.43, Revision 4, USA, March-03-2011
