Telecom Thomson TG797n V2, Начало работы

Страница: 6 / 10

10 9
Internet Access
1. Once the Broadband and Internet lights on the front of the modem are a steady
green a Broadband connection is established.
2. Using your computer open a web browser. You should see a valid web page.
If not, please restart your computer and open the web browser again.
3. You should be successfully connected to New Zealand’s most preferred
broadband service.
4. If you are experiencing problems with your connection, please call the Business
Broadband helpdesk on 0800 BUSINESS.
5. If you want to network additional computers or devices via the Ethernet LAN
ports in the modem, you will need extra Ethernet cables.
6. To access the modem GUI/Interface, please type 192.168.1.254 into a web
browser address bar.
6
7
Creating a Wireless (WiFi) Network
This modem is capable of wireless networking with wireless enabled devices, such
as desktop and laptop computers, tablets, printers and mobile phones. Before you
begin, ensure you have a working internet connection.
Many wireless problems are due to out-of-date operating systems and hardware
drivers. Before setting up a wireless network, it is important that any device
operating systems such as Windows XP/Vista/7, Android, iPhone O/S or Mac O/S
have all of the latest updates installed, and wireless hardware drivers are up to date.
Refer to your device manufacturers’ instructions, website or help desk for details on
how to install, update and configure your operating system and hardware drivers.
If you are not sure if one of your devices supports WiFi capability, refer to the
manufacturers’ website.
Telecom recommends you secure your wireless network using a password to prevent
unauthorised access. Wireless networks have a
Network Name (also known as the
SSID) and Wireless Key (the password).
To set up your
Network Name
and
Wireless Key
, perform the following steps
1. Open a web browser such as Internet Explorer on a PC or Safari on a Mac.
2. In the browser Address Bar enter
192.168.1.254
and press Enter.
3. You will be presented with the main modem interface or GUI (Graphical User
Interface).
4. No password is required to access or change settings in the management interface
for the first time. Once a password is set, you will be prompted to enter your
password to access the modem GUI.
5. Under the Home Network section click on Wireless and the Wireless Overview page
will be displayed.