Telecom MABT-2PTT, Руководство пользователя

Страница: 8 / 16

•
Place the
MABT-2PTT
headset and the mobile phone (BT adapter/dongle or GPS) in a
visible area within 1 meter range.
•
Make sure the
MABT-2PTT
headset is in power off state.
•
Press and hold Power Button for about 8 seconds, when the Blue LED and the Red LED
altemately flash, release the button; the MABT-2PTT headset enters in pairing state.
•
If you want to assign to the phone, BT Adapter/Dongle, Radio Phone or GPS the super
priority property, just short press the PTT (Primary PTT button) once at this time, then
the LED indicator flash pattern will be changed to red two times and blue two times quick
flashing. Super priority pairing is ready.
•
By following the mobile phone or GPS navigator instructions, turn on the Bluetooth®
function, and search the headset devices.
•
From the found devices in your mobile phone, select the device named: “Telecom/
MABT-2PTT.” and try to pair it by entering, if required on mobile phone, the pin code
<0000>. Once paired successful, LED indicator will change from Blue/Red altemately to
Blue flashing and a “di” tone indicates that the MABT-2PTT headset has been connected
with your mobile phone.
Stop Pairing Procedure
To stop an initiated pairing procedure there are three possibilities:
•
Wait until the pairing procedure automatically timeouts
•
Switch off the MABT-2PTT headset by long pressing the Power ON/OFF button.
•
USB charge to reset the headset
NOTE: If the connection with a previously paired device doesn’t take effect, it can
be due to several reasons, including a breakdown of the Bluetooth® function on
the device to be connected. To solve this issue, there are several actions to apply:
•
Switch off and on the MABT-2PTT headset
•
Switch off and on the Bluetooth® on the device to be connected
•
Repeat the pairing procedure
•
Clear all pairing list on the device to be connected and repeat the pairing procedure
Clear All Pairing Devices
In power on and without any active phone call, press and hold both PTT (Primary
PTT button) and —(MINUS button) together for 6 seconds. When RED LED flash 2
times release buttons and, after all paring devices have been cleared, the MABT-
2PTT headset will automatically power off.
Volume Up or Down
In any audio active state, press and hold + (PLUS button) to increase the volume
of corresponding audio source; press and hold —(MINUS button) to decrease
the volume of corresponding audio source. Release the button when the volume
reaches the desired level.
When the max or min volume level is reached, a limit tone note will be played.
The volume of each audio source (two phones, two music, intercom) can be
individually tuned, i.e. 5 different volume parameters can be used.
Volume Levels Automatic Save
All favorite volume levels for each audio source are saved by the MABT-2PTT head -
set at power off, so at next power on, the MABT-2PTT headset can automatically
set the last user favorite volume level, without any operation required for the user.