4
2.2
Working time configuration
P1
*
10x
Command a
manoeuvre using
a
memorized
transmitter
or
by means of the
wired input.
Press
P1
again or wait
25 seconds to quit the
procedure without saving.
Note:
this automatic cycle can be stopped with any command.
If working time is exceeded (90 s), the control unit stops and emits
an intermittent sound until any button is pressed.
(>3 s)
...
intermittent sound
complete
closing
complete
opening
LM flashes
...
complete
opening
...
P1
Press the button
P1
10 times and keep it pressed for 3 seconds.
The buzzer emits an intermittent sound.
TYPE OF MEMORIZATION
P1
A
1 BUTTON:
*
1x
Press the button of the transmitter
relative to the code to memorize.
B
AUTOMATIC COMMANDS
(2 or 3 BUTTONS)
*
2x
Press the button of the transmitter
relative to the code to memorize.
A
1 BUTTON:
*
3x
Press the button of the transmitter
relative to the code to memorize.
C
7/42 CHANNEL TRANSMITTER
*
4x
Press any button of the 7/42 channel
transmitter.
keep it pressed
...
continuous
sound
OPEN
STOP
CLOSE
CLOSE
intermittent sound
2.1
Radio codes memorization
P1
Press the button
P1
as many times as requested by the type of memorization and keep it pressed. The buzzer emits a continuous sound.
Press the button of the transmitter relative to the code to memorize. The memorization is indicated by an intermittent sound of the buzzer.
* The buzzer will make a beep each press.
