5
Code Number:
Series
Model number
TVLink
TVSTRDWxxxST24
T617.01_EN (Temp.)
08/05/14
7 - Copying the function of a transmitter to a new transmitter
1- Press the button
P3
of
the
already memorized
transmitter
. The enabled
receiver sound continuously.
2- Within 5 seconds press a
button of the
already memorized
transmitter
from
which the function
has to be copied. The buzzer will
interrupt the sound for 1 sec., then
starts again for 5 seconds.
3- During the sound press the
button of the
new transmitter
which has to be memorized; the
memorization is indicated by
the intermittently sound of the
buzzer.
8 - Deleting a transmitter
Once
and hold down
8.2 - Deleting all the transmitters
1- Press the push button
P3 once and hold
it
down, the buzzer will
make a beep each time
and then sound slowly
and intermittently.
2- During the sound press
the button which has to
be deleted; the deletion is
indicated by the continuously
sound of the buzzer.
2 times
and hold down
10s
1- Press the push button
P3 two time and hold
it down, the buzzer will
make a beep each time and then sound quickly and intermittently.
2- Hold down the push button for 10 sec., at the end the buzzer will sound
continuously by indicating that the memory has been cancelled.
P3
P3
8.1 - Deleting a transmitter with an already memorized transmitter
2- Within 5 sec. press
the button to delete, the
buzzer emits a continuous
sound to confirm the
deletion.
1- Press the button
P3
of the
transmitter
. The
enabled receiver emits a
slow intermittent sound.
P3
P3
9 - Memory activation/ deactivation of the last value of light intensity
P1 + P3
P3
LED4
P1
ACTIVATION
Press
P1+P3
• led 4 turns ON
• the output blink twice
• the buzzer sounds
DEACTIVATION
Press
P1+P3
• led 4 turns OFF
• the output blink three times
• the buzzer sounds
