Teleco TSV20D, Руководство по эксплуатации

Страница: 31 / 40

- 105 -
Press on the power button
Please insert a disc into the loader.
The disc will be automatically loaded and play will
commences if the disc does not have any menus
recorded on it.
A menu may appear on the TV screen after a few
moments or the lm may start immediately. This
behaviour depends on the disc content and may
change.
Step 3 and 4 is available only when a menu is recorded
on the disc.
Press / / Left / or the numeric
button (s) to select the preferred title.
Press
OK .
To con rm the selected items. The played item may
be a motion picture, a still picture or another submenu
depending on the disc.
If an action corresponding to a button is prohibited the “ ”
symbol appears.
No sound will be heard during Rapid advance or
Rapid reverse.
No sound will be heard during Slow motion play.
Reverse slow motion play may not be available
depending on the dvd content.
In some cases, the subtitle language is not changed
immediately to the selected one.
When the preferred language is not selected even
after pressing the button several times, it means that
the language is not available on the disc.
When the player is restarted or the disc is changed,
the subtitle selection is automatically changed back
to the initial settings.
If a language is selected, not supported by the disc,
the subtitle language will automatically be set to the
disc’s priority language.
Usually a circulation will happen while switching
to another language, that is you can cancel the
subtitle by pressing this button a number of times
until “
” appears on the screen.
When the power is turned on or the disc is removed,
the language heard is the one selected at the
initial settings. If this language is not recorded on
the disc, only the available language on the disc
will be heard.
Some DVDs may not contain root and/or title
menus.
Reverse stepping is not available.
For your convenience:
If you attempt to enter a number greater than
the total time of the current title, the time search
box disappears and “
Input Invalid” message
appears on up-left corner of screen.
Slide Show is disabled when the ZOOM mode is on.
Make sure the DVD disc surface is not damaged.
(Scratch, ngerprint etc.)
Clean the DVD disc and try again.
See instructions described in “Notes on Discs” to clean
your disc properly.
Ensure that the DVD disc is in the tray with the label
facing upward.
A damp DVD disc or condensation may effect the
equipment. Wait for 1 to 2 hours in Stand-by to dry
the equipment.
No disc in the machine. Place a disc into the loader.
Disc incorrectly loaded.
Ensure that the DVD disc is in the tray with the label
facing upward.
Wrong type of disc. The machine cannot play CD-
ROMS etc. The region code of the DVD must match
the player.
Select the language in the set-up menu.
The language for the sound or subtitles on a DVD
cannot be changed.
Multilingual sound and/or subtitles not recorded on
the DVD.
Try to change the sound or subtitles using DVD’s
title menu. Some DVD’s do not allow the user to
change these settings without using the disc’s menu
These functions are not available on the DVD.
Make sure you have pressed the correct buttons on
the remote control. Try once more.
Check if volume is set to an audible level.
Make sure the sound isn’t turned off by mistake.
Check that the appropriate listening mode setting
is correct.
If you have tried the above solutions and none seem
to work, try switching your TV-DVD off and on again.
If this does not work, contact your supplier or TV-DVD
repair technician. Never attempt to repair a defective
TV-DVD yourself.