Teleco Motosat 85, Руководство по установке и инструкция пользователя

Страница: 10 / 24

1) Turn on the SAT receiver and TV set following the instructions provided by their
respective manufacturers.
2) Hold down the “UP” button until 3 beep sounds are emitted by MotoSat. The
antenna will go up to the latest stored position setting
MotoSat will automatically store the latest antenna elevation value to facilitate
pointing operations.
3) Slowly turn the mast to the south until TV signals are displayed on the screen.
4) If you haven’t been able to find a TV signal, check the elevation reached on the
display and compare it with the value shown in table 17. If necessary, use the “UP”
and “DOWN” buttons to correct elevation.
NOTE: the elevation reading on the display may be not accurate because of poor
levelling of the parked vehicle.
5) Slowly turn the mast to the right/left until TV signals are displayed on the screen.
6) To optimise reception, fine-tune both the elevation (with the “UP” and “DOWN”
buttons) and azimuth (mast).
OPERATING INSTRUCTIONS
9