4
10W
On-Desk
Wireless
Charger
User
Manual
5
10W
On-Desk
Wireless
Charger
User
Manual
Mounting and Installation
Choose the mounting option that best meets your needs. Make sure
you mount within reach of a suitable mains outlet.
1.
Bracket secured to desk.
1.
Plug USB cable into the charger
2.
Secure the bracket to the charger using 4x6mm screws
provided, make sure the bracket retains the USB cable in
place.
3.
Optionally screw the bracket to the desk using the 15mm
screw provided. The screw hole is located near the USB
cable retainer.
2.
Bracket secured via lanyard.
1.
Plug USB cable into the charger
2.
Secure the bracket to the charger using 4x6mm screws
provided, make sure the bracket retains the USB cable in
place.
3.
Attach the lanyard to the bracket using the short, 3mm,
grub screw. The fixing point is located near the USB cable
retainer.
4.
Attach the other end of the lanyard as required to a
suitable location on the furniture using the 15mm screw
and wall fixing plug provided.
3.
Adhesive pad.
1.
Plug USB cable into the charger
2.
If you want to use the bracket to secure the USB cable
then attach the bracket to the charger using 4x6mm
screws provided.
3.
Remove the protective paper from one side of the sticky
pad and carefully position the pad on the bracket (if fitted)
or directly on the base of the charger.
4.
Remove the other protective paper from the other side of
the adhesive pad and place as required on the surface.
Note once stuck to the surface it may not be easy to
remove, so make sure you have positioned as required.
4.
Free standing.
1.
Plug USB cable into the charger
2.
If you want to use the bracket to secure the USB cable
then attach the bracket to the charger using 4x6mm
screws provided.
When you have mounted the wireless charger, plug the cable into the
power adapter and then plug the adapter into a suitable wall outlet.
The indicator should blink blue/red twice.
Usage
Simply place a compatible device on the charger so the indicator
turns blue. When the device is fully charged the indicator will turn off.
In the case of an error or foreign object the indicator flashes red.
Remove the device or foreign object so the red flashing light goes off.
Specifications
Power Input:
Micro-USB QC3.0 (5V/2A,9V/1.8A)
Wireless Output:
5/7.5/10W (phone dependent).
Switching Frequency:
110KHz-205KHz
Operating Temperature Range:
0~35°C
Storage Temperature Range:
-20 ~ 70°C
Operation Humidity:
10% ~ 80% RH
Storage Humidity:
5% ~ 95% RH
Size (excluding bracket):
104.8mm (Dia.) * 14.5mm (H)
Indicator
Meaning
Blue/red flash twice
Power up sequence completed.
Blue
Device charging
Off
Device charging completed.
Red flashing
Foreign object detected or other error.
Содержание TA-8200
Страница 1: ...10W On Desk Charger TA 8200 USER MANUA...
